thin_aeolus_configserver_selinux - Man Page

Security-Enhanced Linux secures the thin_aeolus_configserver processes via flexible mandatory access control.

The thin_aeolus_configserver processes execute with the thin_aeolus_configserver_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep thin_aeolus_configserver_t

The thin_aeolus_configserver_t SELinux type can be entered via the thin_aeolus_configserver_exec_t file type.

The default entrypoint paths for the thin_aeolus_configserver_t domain are the following:

/usr/bin/aeolus-configserver-thinwrapper

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to psbP

Policy governs the access confined processes have to files. SELinux thin_aeolus_configserver policy is very flexible allowing users to setup their thin_aeolus_configserver processes in as secure a method as possible.

The following process types are defined for thin_aeolus_configserver:

thin_aeolus_configserver_t

Note: semanage permissive -a thin_aeolus_configserver_t can be used to make the process type thin_aeolus_configserver_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

SELinux policy is customizable based on least access required.  thin_aeolus_configserver policy is extremely flexible and has several booleans that allow you to manipulate the policy and run thin_aeolus_configserver with the tightest access possible.

If you want to dontaudit all daemons scheduling requests (setsched, sys_nice), you must turn on the daemons_dontaudit_scheduling boolean. Enabled by default.

setsebool -P daemons_dontaudit_scheduling 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

The SELinux process type thin_aeolus_configserver_t can manage files labeled with the following file types.  The paths listed are the default paths for these file types.  Note the processes UID still need to have DAC permissions.

cluster_conf_t

/etc/cluster(/.*)?

cluster_var_lib_t

/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?

cluster_var_run_t

/run/crm(/.*)?
/run/cman_.*
/run/rsctmp(/.*)?
/run/aisexec.*
/run/heartbeat(/.*)?
/run/pcsd-ruby.socket
/run/corosync-qnetd(/.*)?
/run/corosync-qdevice(/.*)?
/run/pcsd.socket
/run/corosync.pid
/run/cpglockd.pid
/run/rgmanager.pid
/run/cluster/rgmanager.sk

root_t

/sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd

thin_aeolus_configserver_lib_t

/var/lib/aeolus-configserver(/.*)?

thin_aeolus_configserver_log_t

/var/log/aeolus-configserver(/.*)?

thin_aeolus_configserver_var_run_t

/run/aeolus-configserver(/.*)?

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to lsbP

Policy governs the access confined processes have to these files. SELinux thin_aeolus_configserver policy is very flexible allowing users to setup their thin_aeolus_configserver processes in as secure a method as possible.

STANDARD FILE CONTEXT

SELinux defines the file context types for the thin_aeolus_configserver, if you wanted to store files with these types in a different paths, you need to execute the semanage command to specify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t thin_aeolus_configserver_exec_t '/srv/thin_aeolus_configserver/content(/.*)?'
restorecon -R -v /srv/mythin_aeolus_configserver_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for thin_aeolus_configserver:

thin_aeolus_configserver_exec_t

- Set files with the thin_aeolus_configserver_exec_t type, if you want to transition an executable to the thin_aeolus_configserver_t domain.

thin_aeolus_configserver_lib_t

- Set files with the thin_aeolus_configserver_lib_t type, if you want to treat the files as thin aeolus configserver lib data.

thin_aeolus_configserver_log_t

- Set files with the thin_aeolus_configserver_log_t type, if you want to treat the data as thin aeolus configserver log data, usually stored under the /var/log directory.

thin_aeolus_configserver_var_run_t

- Set files with the thin_aeolus_configserver_var_run_t type, if you want to store the thin aeolus configserver files under the /run or /var/run directory.

Note: File context can be temporarily modified with the chcon command.  If you want to permanently change the file context you need to use the semanage fcontext command.  This will modify the SELinux labeling database.  You will need to use restorecon to apply the labels.

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

This manual page was auto-generated using sepolicy manpage .

selinux(8), thin_aeolus_configserver(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8)

thin_selinux(8).