systemd_timedated_selinux - Man Page

Security-Enhanced Linux secures the systemd_timedated processes via flexible mandatory access control.

The systemd_timedated processes execute with the systemd_timedated_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep systemd_timedated_t

The systemd_timedated_t SELinux type can be entered via the systemd_timedated_exec_t file type.

The default entrypoint paths for the systemd_timedated_t domain are the following:

/usr/lib/systemd/systemd-timedated, /usr/lib/systemd/systemd-timesyncd, /usr/lib/systemd/systemd-time-wait-sync

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to psbP

Policy governs the access confined processes have to files. SELinux systemd_timedated policy is very flexible allowing users to setup their systemd_timedated processes in as secure a method as possible.

The following process types are defined for systemd_timedated:

systemd_timedated_t

Note: semanage permissive -a systemd_timedated_t can be used to make the process type systemd_timedated_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

SELinux policy is customizable based on least access required.  systemd_timedated policy is extremely flexible and has several booleans that allow you to manipulate the policy and run systemd_timedated with the tightest access possible.

If you want to dontaudit all daemons scheduling requests (setsched, sys_nice), you must turn on the daemons_dontaudit_scheduling boolean. Enabled by default.

setsebool -P daemons_dontaudit_scheduling 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.

setsebool -P nis_enabled 1

The SELinux process type systemd_timedated_t can manage files labeled with the following file types.  The paths listed are the default paths for these file types.  Note the processes UID still need to have DAC permissions.

adjtime_t

/etc/adjtime

cluster_conf_t

/etc/cluster(/.*)?

cluster_var_lib_t

/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?

cluster_var_run_t

/run/crm(/.*)?
/run/cman_.*
/run/rsctmp(/.*)?
/run/aisexec.*
/run/heartbeat(/.*)?
/run/pcsd-ruby.socket
/run/corosync-qnetd(/.*)?
/run/corosync-qdevice(/.*)?
/run/pcsd.socket
/run/corosync.pid
/run/cpglockd.pid
/run/rgmanager.pid
/run/cluster/rgmanager.sk

config_home_t

/root/.kde(/.*)?
/root/.xine(/.*)?
/root/.config(/.*)?
/root/.Xdefaults
/home/[^/]+/.kde(/.*)?
/home/[^/]+/.xine(/.*)?
/home/[^/]+/.config(/.*)?
/home/[^/]+/.cache/dconf(/.*)?
/home/[^/]+/.Xdefaults
/run/user/[0-9]+/dconf(/.*)?

config_usr_t

/usr/share/config(/.*)?

krb5_host_rcache_t

/var/tmp/krb5_0.rcache2
/var/cache/krb5rcache(/.*)?
/var/tmp/nfs_0
/var/tmp/DNS_25
/var/tmp/host_0
/var/tmp/imap_0
/var/tmp/HTTP_23
/var/tmp/HTTP_48
/var/tmp/ldap_55
/var/tmp/ldap_487
/var/tmp/ldapmap1_0

root_t

/sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd

systemd_passwd_var_run_t

/run/systemd/ask-password(/.*)?
/run/systemd/ask-password-block(/.*)?

systemd_timedated_var_lib_t

/var/lib/systemd/timesync(/.*)?
/var/lib/private/systemd/timesync(/.*)?

systemd_timedated_var_run_t

/run/systemd/timesync(/.*)?

xserver_etc_t

/etc/X11/xorg.conf.d(/.*)?

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to lsbP

Policy governs the access confined processes have to these files. SELinux systemd_timedated policy is very flexible allowing users to setup their systemd_timedated processes in as secure a method as possible.

STANDARD FILE CONTEXT

SELinux defines the file context types for the systemd_timedated, if you wanted to store files with these types in a different paths, you need to execute the semanage command to specify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t systemd_timedated_exec_t '/srv/systemd_timedated/content(/.*)?'
restorecon -R -v /srv/mysystemd_timedated_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for systemd_timedated:

systemd_timedated_exec_t

- Set files with the systemd_timedated_exec_t type, if you want to transition an executable to the systemd_timedated_t domain.

Paths:

/usr/lib/systemd/systemd-timedated, /usr/lib/systemd/systemd-timesyncd, /usr/lib/systemd/systemd-time-wait-sync

systemd_timedated_unit_file_t

- Set files with the systemd_timedated_unit_file_t type, if you want to treat the files as systemd timedated unit content.

systemd_timedated_var_lib_t

- Set files with the systemd_timedated_var_lib_t type, if you want to store the systemd timedated files under the /var/lib directory.

Paths:

/var/lib/systemd/timesync(/.*)?, /var/lib/private/systemd/timesync(/.*)?

systemd_timedated_var_run_t

- Set files with the systemd_timedated_var_run_t type, if you want to store the systemd timedated files under the /run or /var/run directory.

Note: File context can be temporarily modified with the chcon command.  If you want to permanently change the file context you need to use the semanage fcontext command.  This will modify the SELinux labeling database.  You will need to use restorecon to apply the labels.

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

This manual page was auto-generated using sepolicy manpage .

selinux(8), systemd_timedated(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8)