prelude_selinux - Man Page

Security-Enhanced Linux secures the prelude processes via flexible mandatory access control.

The prelude processes execute with the prelude_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep prelude_t

The prelude_t SELinux type can be entered via the prelude_exec_t file type.

The default entrypoint paths for the prelude_t domain are the following:

/usr/bin/prelude-manager

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to psbP

Policy governs the access confined processes have to files. SELinux prelude policy is very flexible allowing users to setup their prelude processes in as secure a method as possible.

The following process types are defined for prelude:

prelude_t, prelude_audisp_t, prelude_correlator_t, prelude_lml_t

Note: semanage permissive -a prelude_t can be used to make the process type prelude_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

SELinux policy is customizable based on least access required.  prelude policy is extremely flexible and has several booleans that allow you to manipulate the policy and run prelude with the tightest access possible.

If you want to dontaudit all daemons scheduling requests (setsched, sys_nice), you must turn on the daemons_dontaudit_scheduling boolean. Enabled by default.

setsebool -P daemons_dontaudit_scheduling 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.

setsebool -P nis_enabled 1

SELinux defines port types to represent TCP and UDP ports.

You can see the types associated with a port by using the following command:

semanage port -l

Policy governs the access confined processes have to these ports. SELinux prelude policy is very flexible allowing users to setup their prelude processes in as secure a method as possible.

The following port types are defined for prelude:

    prelude_port_t

Default Defined Ports: tcp 4690 udp 4690

The SELinux process type prelude_t can manage files labeled with the following file types.  The paths listed are the default paths for these file types.  Note the processes UID still need to have DAC permissions.

cluster_conf_t

/etc/cluster(/.*)?

cluster_var_lib_t

/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?

cluster_var_run_t

/run/crm(/.*)?
/run/cman_.*
/run/rsctmp(/.*)?
/run/aisexec.*
/run/heartbeat(/.*)?
/run/pcsd-ruby.socket
/run/corosync-qnetd(/.*)?
/run/corosync-qdevice(/.*)?
/run/pcsd.socket
/run/corosync.pid
/run/cpglockd.pid
/run/rgmanager.pid
/run/cluster/rgmanager.sk

krb5_host_rcache_t

/var/tmp/krb5_0.rcache2
/var/cache/krb5rcache(/.*)?
/var/tmp/nfs_0
/var/tmp/DNS_25
/var/tmp/host_0
/var/tmp/imap_0
/var/tmp/HTTP_23
/var/tmp/HTTP_48
/var/tmp/ldap_55
/var/tmp/ldap_487
/var/tmp/ldapmap1_0

prelude_spool_t

/var/spool/prelude(/.*)?
/var/spool/prelude-manager(/.*)?

prelude_var_lib_t

/var/lib/prelude-lml(/.*)?

prelude_var_run_t

/run/prelude-manager(/.*)?

root_t

/sysroot/.aleph-version.json
/sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to lsbP

Policy governs the access confined processes have to these files. SELinux prelude policy is very flexible allowing users to setup their prelude processes in as secure a method as possible.

EQUIVALENCE DIRECTORIES

prelude policy stores data with multiple different file context types under the /var/spool/prelude directory.  If you would like to store the data in a different directory you can use the semanage command to create an equivalence mapping.  If you wanted to store this data under the /srv directory you would execute the following command:

semanage fcontext -a -e /var/spool/prelude /srv/prelude
restorecon -R -v /srv/prelude

STANDARD FILE CONTEXT

SELinux defines the file context types for the prelude, if you wanted to store files with these types in a different paths, you need to execute the semanage command to specify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t prelude_exec_t '/srv/prelude/content(/.*)?'
restorecon -R -v /srv/myprelude_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for prelude:

prelude_audisp_exec_t

- Set files with the prelude_audisp_exec_t type, if you want to transition an executable to the prelude_audisp_t domain.

prelude_audisp_var_run_t

- Set files with the prelude_audisp_var_run_t type, if you want to store the prelude audisp files under the /run or /var/run directory.

prelude_correlator_config_t

- Set files with the prelude_correlator_config_t type, if you want to treat the files as prelude correlator configuration data, usually stored under the /etc directory.

prelude_correlator_exec_t

- Set files with the prelude_correlator_exec_t type, if you want to transition an executable to the prelude_correlator_t domain.

prelude_exec_t

- Set files with the prelude_exec_t type, if you want to transition an executable to the prelude_t domain.

prelude_initrc_exec_t

- Set files with the prelude_initrc_exec_t type, if you want to transition an executable to the prelude_initrc_t domain.

Paths:

/etc/rc.d/init.d/prelude-lml, /etc/rc.d/init.d/prelude-manager, /etc/rc.d/init.d/prelude-correlator

prelude_lml_exec_t

- Set files with the prelude_lml_exec_t type, if you want to transition an executable to the prelude_lml_t domain.

prelude_lml_tmp_t

- Set files with the prelude_lml_tmp_t type, if you want to store prelude lml temporary files in the /tmp directories.

prelude_lml_var_run_t

- Set files with the prelude_lml_var_run_t type, if you want to store the prelude lml files under the /run or /var/run directory.

prelude_log_t

- Set files with the prelude_log_t type, if you want to treat the data as prelude log data, usually stored under the /var/log directory.

prelude_spool_t

- Set files with the prelude_spool_t type, if you want to store the prelude files under the /var/spool directory.

Paths:

/var/spool/prelude(/.*)?, /var/spool/prelude-manager(/.*)?

prelude_var_lib_t

- Set files with the prelude_var_lib_t type, if you want to store the prelude files under the /var/lib directory.

prelude_var_run_t

- Set files with the prelude_var_run_t type, if you want to store the prelude files under the /run or /var/run directory.

Note: File context can be temporarily modified with the chcon command.  If you want to permanently change the file context you need to use the semanage fcontext command.  This will modify the SELinux labeling database.  You will need to use restorecon to apply the labels.

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage port can also be used to manipulate the port definitions

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

This manual page was auto-generated using sepolicy manpage .

selinux(8), prelude(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8), prelude_audisp_selinux(8), prelude_audisp_selinux(8), prelude_correlator_selinux(8), prelude_correlator_selinux(8), prelude_lml_selinux(8), prelude_lml_selinux(8)