monmaptool - Man Page

monmaptool <action> [options] mapfilename

monmaptool is a utility to create, view, and modify a monitor cluster map for the Ceph distributed storage system. The monitor map specifies the only fixed addresses in the Ceph distributed system. All other daemons bind to arbitrary addresses and register themselves with the monitors.

When creating a map with --create, a new monitor map with a new, random UUID will be created. It should be followed by one or more monitor addresses.

The default Ceph monitor port for messenger protocol v1 is 6789, and 3300 for protocol v2.

Multiple actions can be performed per invocation.

--print

print a plaintext dump of the map, after any modifications are made.

--feature-list [plain|parseable]

list the enabled features as well as the available ones.

By default, a human readable output is produced.

--create

create a new monitor map with a new UUID (and with it, a new, empty Ceph cluster).

--clobber

allow monmaptool to create a new mapfilename in place of an existing map.

Only useful when --create is used.

--generate

generate a new monmap based on the values on the command line or specified in the ceph configuration.  This is, in order of preference,

1. --monmap filename to specify a monmap to load
2. --mon-host 'host1,ip2' to specify a list of hosts or ip addresses
3. [mon.foo] sections containing mon addr settings in the config. Note that this method is not recommended and support will be removed in a future release.

--filter-initial-members

filter the initial monmap by applying the mon initial members setting.  Monitors not present in that list will be removed, and initial members not present in the map will be added with dummy addresses.

--add name ip[:port]

add a monitor with the specified ip:port to the map.

If the nautilus feature is set, and the port is not, the monitor will be added for both messenger protocols.

--addv name [protocol:ip:port[,...]]

add a monitor with the specified version:ip:port to the map.

--rm name

remove the monitor with the specified name from the map.

--fsid uuid

set the fsid to the given uuid.  If not specified with --create, a random fsid will be generated.

--feature-set value [--optional|--persistent]

enable a feature.

--feature-unset value [--optional|--persistent]

disable a feature.

--enable-all-features

enable all supported features.

--set-min-mon-release release

set the min_mon_release.

To create a new map with three monitors (for a fresh Ceph cluster):

monmaptool --create --add nodeA 192.168.0.10 --add nodeB 192.168.0.11 \
  --add nodeC 192.168.0.12 --enable-all-features --clobber monmap

To display the contents of the map:

monmaptool --print monmap

To replace one monitor:

monmaptool --rm nodeA monmap
monmaptool --add nodeA 192.168.0.9 monmap

monmaptool is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to the Ceph documentation at https://docs.ceph.com for more information.

ceph(8), crushtool(8),

2010-2024, Inktank Storage, Inc. and contributors. Licensed under Creative Commons Attribution Share Alike 3.0 (CC-BY-SA-3.0)