fence_idrac - Man Page
Name
fence_ipmilan — Fence agent for IPMI
fence_ilo3 — Fence agent for HP iLO3 (symlink)
fence_ilo4 — Fence agent for HP iLO4 (symlink)
fence_ilo5 — Fence agent for HP iLO5 (symlink)
fence_ipmilanplus — Fence agent for IPMIv2 lanplus (symlink)
fence_imm — Fence agent for IBM Integrated Management Module (symlink)
fence_idrac — Fence agent for Dell iDRAC (symlink)
Description
fence_idrac is a Power Fencing agent which can be used with machines controlled by IPMI. This agent calls support software ipmitool (http://ipmitool.sf.net/).
WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.
The fence agent accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. The agent can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL:
Parameters
- -o, --action=[action]
Fencing action (Default Value: reboot)
- -A, --auth=[auth]
IPMI Lan Auth type. (md5|password|none)
- -C, --cipher=[cipher]
Ciphersuite to use (same as ipmitool -C parameter)
- --hexadecimal-kg=[key]
Hexadecimal-encoded Kg key for IPMIv2 authentication
- -a, --ip=[ip]
IP address or hostname of fencing device
- -u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 623)
- -P, --lanplus
Use Lanplus to improve security of connection (Default Value: 0)
- -m, --method=[method]
Method to fence (onoff|cycle) (Default Value: onoff)
- -p, --password=[password]
Login password or passphrase
- -S, --password-script=[script]
Script to run to retrieve password
- -n, --plug=[ip]
IP address or hostname of fencing device (together with --port-as-ip)
- -L, --privlvl=[level]
Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)
- --target=[targetaddress]
Bridge IPMI requests to the remote target address
- -l, --username=[name]
Login name
- -q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
- -v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
- --verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
- -D, --debug-file=[debugfile]
Write debug information to given file
- -V, --version
Display version information and exit
- -h, --help
Display help and exit
- --plug-separator=[char]
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
- --delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
- --disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- --ipmitool-path=[path]
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
- --login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
- --port-as-ip
Make "port/plug" to be an alias to IP address
- --power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 2)
- --shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
- --ipmitool-timeout=[timeout]
Timeout (sec) for IPMI operation (Default Value: 2)
- --retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
- --use-sudo
Use sudo (without password) when calling 3rd party software
- --sudo-path=[path]
Path to sudo binary (Default Value: /usr/bin/sudo)
Actions
- on
Power on machine.
- off
Power off machine.
- reboot
Reboot machine.
- status
This returns the status of the plug/virtual machine.
- monitor
Check the health of fence device
- metadata
Display the XML metadata describing this resource.
- manpage
The operational behavior of this is not known.
- validate-all
Validate if all required parameters are entered.
- diag
Pulse a diagnostic interrupt to the processor(s).
Stdin Parameters
- action
Fencing action (Default Value: reboot)
- auth
IPMI Lan Auth type. (md5|password|none)
- cipher
Ciphersuite to use (same as ipmitool -C parameter)
- hexadecimal_kg
Hexadecimal-encoded Kg key for IPMIv2 authentication
- ip
IP address or hostname of fencing device Obsoletes: ipaddr
- ipport
TCP/UDP port to use for connection with device (Default Value: 623)
- lanplus
Use Lanplus to improve security of connection (Default Value: 0)
- method
Method to fence (onoff|cycle) (Default Value: onoff)
- password
Login password or passphrase Obsoletes: passwd
- password_script
Script to run to retrieve password Obsoletes: passwd_script
- plug
IP address or hostname of fencing device (together with --port-as-ip) Obsoletes: port
- privlvl
Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)
- target
Bridge IPMI requests to the remote target address
- username
Login name Obsoletes: login
- quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
- verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
- verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
- debug_file
Write debug information to given file Obsoletes: debug
- version
Display version information and exit
- help
Display help and exit
- plug_separator
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
- delay
Wait X seconds before fencing is started (Default Value: 0)
- disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- ipmitool_path
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
- login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
- port_as_ip
Make "port/plug" to be an alias to IP address
- power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
Wait X seconds after issuing ON/OFF (Default Value: 2)
- shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
- ipmitool_timeout
Timeout (sec) for IPMI operation (Default Value: 2)
- retry_on
Count of attempts to retry power on (Default Value: 1)
- use_sudo
Use sudo (without password) when calling 3rd party software Obsoletes: sudo
- sudo_path
Path to sudo binary (Default Value: /usr/bin/sudo)