fence_cdu - Man Page
Fence agent for a Sentry Switch CDU over telnet
Description
fence_cdu is a Power Fencing agent which can be used with the Sentry Switch CDU. It logs into the device via telnet and power's on/off an outlet.
The fence agent accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. The agent can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.servertech.com
Parameters
- -o, --action=[action]
Fencing action (Default Value: reboot)
- -a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
- -u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 23)
- -p, --password=[password]
Login password or passphrase
- -S, --password-script=[script]
Script to run to retrieve password
- -n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is always required.
- -s, --switch=[id]
Physical switch number on device
- -l, --username=[name]
Login name This parameter is always required.
- -q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
- -v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
- --verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
- -D, --debug-file=[debugfile]
Write debug information to given file
- -V, --version
Display version information and exit
- -h, --help
Display help and exit
- --plug-separator=[char]
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
- -C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
- --delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
- --disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- --login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
- --power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
- --shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
- --retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
- --telnet-path=[path]
Path to telnet binary (Default Value: /usr/bin/telnet)
Actions
- on
Power on machine.
- off
Power off machine.
- reboot
Reboot machine.
- status
This returns the status of the plug/virtual machine.
- list
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
- list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.
- monitor
Check the health of fence device
- metadata
Display the XML metadata describing this resource.
- manpage
The operational behavior of this is not known.
- validate-all
Validate if all required parameters are entered.
Stdin Parameters
- action
Fencing action (Default Value: reboot)
- ip
IP address or hostname of fencing device This parameter is always required. Obsoletes: ipaddr
- ipport
TCP/UDP port to use for connection with device (Default Value: 23)
- password
Login password or passphrase Obsoletes: passwd
- password_script
Script to run to retrieve password Obsoletes: passwd_script
- plug
Physical plug number on device, UUID or identification of machine This parameter is always required. Obsoletes: port
- switch
Physical switch number on device
- username
Login name This parameter is always required. Obsoletes: login
- quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
- verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
- verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
- debug_file
Write debug information to given file Obsoletes: debug
- version
Display version information and exit
- help
Display help and exit
- plug_separator
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
- separator
Separator for CSV created by 'list' operation (Default Value: ,)
- delay
Wait X seconds before fencing is started (Default Value: 0)
- disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
- power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
- shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
- retry_on
Count of attempts to retry power on (Default Value: 1)
- telnet_path
Path to telnet binary (Default Value: /usr/bin/telnet)