rte_ip4.h - Man Page

#define RTE_IPV4(a,  b,  c,  d)
#define RTE_IPV4_MAX_PKT_LEN   65535
#define RTE_IPV4_HDR_IHL_MASK   (0x0f)
#define RTE_IPV4_IHL_MULTIPLIER   (4)
#define RTE_IPV4_ANY   ((uint32_t)0x00000000)
#define RTE_IPV4_LOOPBACK   ((uint32_t)0x7f000001)
#define RTE_IPV4_BROADCAST   ((uint32_t)0xe0000000)
#define RTE_IPV4_ALLHOSTS_GROUP   ((uint32_t)0xe0000001)
#define RTE_IPV4_ALLRTRS_GROUP   ((uint32_t)0xe0000002)
#define RTE_IPV4_MAX_LOCAL_GROUP   ((uint32_t)0xe00000ff)
#define RTE_IPV4_MIN_MCAST   RTE_IPV4(224, 0, 0, 0)
#define RTE_IPV4_MAX_MCAST   RTE_IPV4(239, 255, 255, 255)
#define RTE_IS_IPV4_MCAST(x)

struct __rte_aligned (2) rte_ipv4_hdr
static uint8_t rte_ipv4_hdr_len (const struct rte_ipv4_hdr *ipv4_hdr)
static uint16_t rte_ipv4_cksum (const struct rte_ipv4_hdr *ipv4_hdr)
static __rte_experimental uint16_t rte_ipv4_cksum_simple (const struct rte_ipv4_hdr *ipv4_hdr)
static uint16_t rte_ipv4_phdr_cksum (const struct rte_ipv4_hdr *ipv4_hdr, uint64_t ol_flags)
static uint16_t rte_ipv4_udptcp_cksum (const struct rte_ipv4_hdr *ipv4_hdr, const void *l4_hdr)
static uint16_t rte_ipv4_udptcp_cksum_mbuf (const struct rte_mbuf *m, const struct rte_ipv4_hdr *ipv4_hdr, uint16_t l4_off)
static int rte_ipv4_udptcp_cksum_verify (const struct rte_ipv4_hdr *ipv4_hdr, const void *l4_hdr)
static int rte_ipv4_udptcp_cksum_mbuf_verify (const struct rte_mbuf *m, const struct rte_ipv4_hdr *ipv4_hdr, uint16_t l4_off)

Value:

                       ((uint32_t)(((a) & 0xff) << 24) | \
                       (((b) & 0xff) << 16) | \
                       (((c) & 0xff) << 8)  | \
                       ((d) & 0xff))

Create IPv4 address

Definition at line 68 of file rte_ip4.h.

Maximal IPv4 packet length (including a header)

Definition at line 74 of file rte_ip4.h.

Internet header length mask for version_ihl field

Definition at line 77 of file rte_ip4.h.

Internet header length field multiplier (IHL field specifies overall header length in number of 4-byte words)

Definition at line 82 of file rte_ip4.h.

0.0.0.0

Definition at line 110 of file rte_ip4.h.

127.0.0.1

Definition at line 111 of file rte_ip4.h.

224.0.0.0

Definition at line 112 of file rte_ip4.h.

224.0.0.1

Definition at line 113 of file rte_ip4.h.

224.0.0.2

Definition at line 114 of file rte_ip4.h.

224.0.0.255

Definition at line 115 of file rte_ip4.h.

Minimal IPv4-multicast address

Definition at line 120 of file rte_ip4.h.

Maximum IPv4 multicast address

Definition at line 122 of file rte_ip4.h.

Value:

    ((x) >= RTE_IPV4_MIN_MCAST && (x) <= RTE_IPV4_MAX_MCAST)

check if IPv4 address is multicast

Definition at line 125 of file rte_ip4.h.

IPv4 Header < version and header length

< header length

< version

< type of service

< length of packet

< packet ID

< fragmentation offset

< time to live

< protocol ID

< header checksum

< source address

< destination address

Definition at line 1 of file rte_ip4.h.

Get the length of an IPv4 header.

Parameters

ipv4_hdr Pointer to the IPv4 header.

Returns

The length of the IPv4 header (with options if present) in bytes.

Definition at line 142 of file rte_ip4.h.

Process the IPv4 checksum of an IPv4 header.

The checksum field must be set to 0 by the caller.

Parameters

ipv4_hdr The pointer to the contiguous IPv4 header.

Returns

The complemented checksum to set in the IP packet.

Definition at line 159 of file rte_ip4.h.

Warning

EXPERIMENTAL: this API may change without prior notice.

Process the IPv4 checksum of an IPv4 header without any extensions.

The checksum field does NOT have to be set by the caller, the field is skipped by the calculation.

Parameters

ipv4_hdr The pointer to the contiguous IPv4 header.

Returns

The complemented checksum to set in the IP packet.

Definition at line 182 of file rte_ip4.h.

Process the pseudo-header checksum of an IPv4 header.

The checksum field must be set to 0 by the caller.

Depending on the ol_flags, the pseudo-header checksum expected by the drivers is not the same. For instance, when TSO is enabled, the IP payload length must not be included in the packet.

When ol_flags is 0, it computes the standard pseudo-header checksum.

Parameters

ipv4_hdr The pointer to the contiguous IPv4 header.
ol_flags The ol_flags of the associated mbuf.

Returns

The non-complemented checksum to set in the L4 header.

Definition at line 220 of file rte_ip4.h.

Process the IPv4 UDP or TCP checksum.

The layer 4 checksum must be set to 0 in the L4 header by the caller.

Parameters

ipv4_hdr The pointer to the contiguous IPv4 header.
l4_hdr The pointer to the beginning of the L4 header.

Returns

The complemented checksum to set in the L4 header.

Definition at line 284 of file rte_ip4.h.

Compute the IPv4 UDP/TCP checksum of a packet.

Parameters

m The pointer to the mbuf.
ipv4_hdr The pointer to the contiguous IPv4 header.
l4_off The offset in bytes to start L4 checksum.

Returns

The complemented checksum to set in the L4 header.

Definition at line 341 of file rte_ip4.h.

Validate the IPv4 UDP or TCP checksum.

In case of UDP, the caller must first check if udp_hdr->dgram_cksum is 0 (i.e. no checksum).

Parameters

ipv4_hdr The pointer to the contiguous IPv4 header.
l4_hdr The pointer to the beginning of the L4 header.

Returns

Return 0 if the checksum is correct, else -1.

Definition at line 373 of file rte_ip4.h.

Verify the IPv4 UDP/TCP checksum of a packet.

In case of UDP, the caller must first check if udp_hdr->dgram_cksum is 0 (i.e. no checksum).

Parameters

m The pointer to the mbuf.
ipv4_hdr The pointer to the contiguous IPv4 header.
l4_off The offset in bytes to start L4 checksum.

Returns

Return 0 if the checksum is correct, else -1.

Definition at line 400 of file rte_ip4.h.