glTexBuffer.3G - Man Page
attach a buffer object's data store to a buffer texture object
C Specification
void glTexBuffer(GLenum target, GLenum internalformat, GLuint buffer);
void glTextureBuffer(GLuint texture, GLenum internalformat, GLuint buffer);
Parameters
- target
Specifies the target to which the texture is bound for glTexBuffer. Must be GL_TEXTURE_BUFFER.
- texture
Specifies the texture object name for glTextureBuffer.
- internalformat
Specifies the internal format of the data in the store belonging to buffer.
- buffer
Specifies the name of the buffer object whose storage to attach to the active buffer texture.
Description
glTexBuffer and glTextureBuffer attaches the data store of a specified buffer object to a specified texture object, and specify the storage format for the texture image found in the buffer object. The texture object must be a buffer texture.
If buffer is zero, any buffer object attached to the buffer texture is detached and no new buffer object is attached. If buffer is non-zero, it must be the name of an existing buffer object.
internalformat specifies the storage format, and must be one of the following sized internal formats:
internalformat specifies the storage format, and must be one of the following sized internal formats:
| Component | |||||||
|---|---|---|---|---|---|---|---|
| Sized Internal Format | Base Type | Components | Norm | 0 | 1 | 2 | 3 |
| GL_R8 | ubyte | 1 | YES | R | 0 | 0 | 1 |
| GL_R16 | ushort | 1 | YES | R | 0 | 0 | 1 |
| GL_R16F | half | 1 | NO | R | 0 | 0 | 1 |
| GL_R32F | float | 1 | NO | R | 0 | 0 | 1 |
| GL_R8I | byte | 1 | NO | R | 0 | 0 | 1 |
| GL_R16I | short | 1 | NO | R | 0 | 0 | 1 |
| GL_R32I | int | 1 | NO | R | 0 | 0 | 1 |
| GL_R8UI | ubyte | 1 | NO | R | 0 | 0 | 1 |
| GL_R16UI | ushort | 1 | NO | R | 0 | 0 | 1 |
| GL_R32UI | uint | 1 | NO | R | 0 | 0 | 1 |
| GL_RG8 | ubyte | 2 | YES | R | G | 0 | 1 |
| GL_RG16 | ushort | 2 | YES | R | G | 0 | 1 |
| GL_RG16F | half | 2 | NO | R | G | 0 | 1 |
| GL_RG32F | float | 2 | NO | R | G | 0 | 1 |
| GL_RG8I | byte | 2 | NO | R | G | 0 | 1 |
| GL_RG16I | short | 2 | NO | R | G | 0 | 1 |
| GL_RG32I | int | 2 | NO | R | G | 0 | 1 |
| GL_RG8UI | ubyte | 2 | NO | R | G | 0 | 1 |
| GL_RG16UI | ushort | 2 | NO | R | G | 0 | 1 |
| GL_RG32UI | uint | 2 | NO | R | G | 0 | 1 |
| GL_RGB32F | float | 3 | NO | R | G | B | 1 |
| GL_RGB32I | int | 3 | NO | R | G | B | 1 |
| GL_RGB32UI | uint | 3 | NO | R | G | B | 1 |
| GL_RGBA8 | uint | 4 | YES | R | G | B | A |
| GL_RGBA16 | short | 4 | YES | R | G | B | A |
| GL_RGBA16F | half | 4 | NO | R | G | B | A |
| GL_RGBA32F | float | 4 | NO | R | G | B | A |
| GL_RGBA8I | byte | 4 | NO | R | G | B | A |
| GL_RGBA16I | short | 4 | NO | R | G | B | A |
| GL_RGBA32I | int | 4 | NO | R | G | B | A |
| GL_RGBA8UI | ubyte | 4 | NO | R | G | B | A |
| GL_RGBA16UI | ushort | 4 | NO | R | G | B | A |
| GL_RGBA32UI | uint | 4 | NO | R | G | B | A |
When a buffer object is attached to a buffer texture, the buffer object's data store is taken as the texture's texel array. The number of texels in the buffer texture's texel array is given by $$ \left\lfloor { size \over { components \times sizeof(base\_type) } } \right\rfloor $$ where $size$ is the size of the buffer object in basic machine units (the value of GL_BUFFER_SIZE for buffer), and $components$ and $base\_type$ are the element count and base data type for elements, as specified in the table above. The number of texels in the texel array is then clamped to the value of the implementation-dependent limit GL_MAX_TEXTURE_BUFFER_SIZE. When a buffer texture is accessed in a shader, the results of a texel fetch are undefined if the specified texel coordinate is negative, or greater than or equal to the clamped number of texels in the texel array.
Errors
GL_INVALID_ENUM is generated by glTexBuffer if target is not GL_TEXTURE_BUFFER.
GL_INVALID_OPERATION is generated by glTextureBuffer if texture is not the name of an existing texture object.
GL_INVALID_ENUM is generated by glTextureBuffer if the effective target of texture is not GL_TEXTURE_BUFFER.
GL_INVALID_ENUM is generated if internalformat is not one of the sized internal formats described above.
GL_INVALID_OPERATION is generated if buffer is not zero and is not the name of an existing buffer object.
Associated Gets
glGet() with argument GL_MAX_TEXTURE_BUFFER_SIZE
glGet() with argument GL_TEXTURE_BINDING_BUFFER
glGetTexLevelParameter() with argument GL_TEXTURE_BUFFER_DATA_STORE_BINDING
Version Support
| OpenGL Version | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Function / Feature Name | 2.0 | 2.1 | 3.0 | 3.1 | 3.2 | 3.3 | 4.0 | 4.1 | 4.2 | 4.3 | 4.4 | 4.5 |
| glTexBuffer | - | - | - | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| glTextureBuffer | - | - | - | - | - | - | - | - | - | - | - | ✔ |
See Also
glGenBuffers(), glBindBuffer(), glBufferData(), glDeleteBuffers(), glGenTextures(), glBindTexture(), glDeleteTextures()
Copyright
Copyright © 2010-2014 Khronos Group. This material may be distributed subject to the terms and conditions set forth in the Open Publication License, v 1.0, 8 June 1999. http://opencontent.org/openpub/.
Copyright
Copyright © 2010-2014 Khronos Group
Referenced By
glBindImageTextures.3G(3), glBindTexture.3G(3), glBindTextures.3G(3), glBindTextureUnit.3G(3), glCreateTextures.3G(3), glTexBufferRange.3G(3).
The man page glTextureBuffer.3G(3) is an alias of glTexBuffer.3G(3).