nbft_security_flags - Man Page

enum nbft_security_flags {
   NBFT_SECURITY_VALID ,

   NBFT_SECURITY_IN_BAND_AUTH_MASK ,

   NBFT_SECURITY_IN_BAND_AUTH_NOT_SUPPORTED ,

   NBFT_SECURITY_IN_BAND_AUTH_NOT_REQUIRED ,

   NBFT_SECURITY_IN_BAND_AUTH_REQUIRED ,

   NBFT_SECURITY_AUTH_POLICY_LIST_MASK ,

   NBFT_SECURITY_AUTH_POLICY_LIST_NOT_SUPPORTED ,

   NBFT_SECURITY_AUTH_POLICY_LIST_DRIVER ,

   NBFT_SECURITY_AUTH_POLICY_LIST_ADMIN ,

   NBFT_SECURITY_SEC_CHAN_NEG_MASK ,

   NBFT_SECURITY_SEC_CHAN_NEG_NOT_SUPPORTED ,

   NBFT_SECURITY_SEC_CHAN_NEG_NOT_REQUIRED ,

   NBFT_SECURITY_SEC_CHAN_NEG_REQUIRED ,

   NBFT_SECURITY_SEC_POLICY_LIST_MASK ,

   NBFT_SECURITY_SEC_POLICY_LIST_NOT_SUPPORTED ,

   NBFT_SECURITY_SEC_POLICY_LIST_DRIVER ,

   NBFT_SECURITY_SEC_POLICY_LIST_ADMIN ,

   NBFT_SECURITY_CIPHER_RESTRICTED ,

   NBFT_SECURITY_AUTH_DH_GROUPS_RESTRICTED ,

   NBFT_SECURITY_SEC_HASH_FUNC_POLICY_LIST

};

NBFT_SECURITY_VALID

Descriptor Valid: If set to 1h, then this descriptor is valid. If cleared to 0h, then this descriptor is not valid.

NBFT_SECURITY_IN_BAND_AUTH_MASK

Mask to get the In-Band Authentication Required field.

NBFT_SECURITY_IN_BAND_AUTH_NOT_SUPPORTED

In-band authentication is not supported by the NVM subsystem.

NBFT_SECURITY_IN_BAND_AUTH_NOT_REQUIRED

In-band authentication is supported by the NVM subsystem and is not required.

NBFT_SECURITY_IN_BAND_AUTH_REQUIRED

In-band authentication is supported by the NVM subsystem and is required.

NBFT_SECURITY_AUTH_POLICY_LIST_MASK

Mask to get the Authentication Policy List flag: This field indicates whether authentication protocols were indicated by policy from driver defaults or administrative configuration.

NBFT_SECURITY_AUTH_POLICY_LIST_NOT_SUPPORTED

Authentication Protocols Heap Object Reference field Offset and Length are reserved.

NBFT_SECURITY_AUTH_POLICY_LIST_DRIVER

Authentication Protocols Offset field and the Authentication Protocols Length field indicate a list of authentication protocols used by the driver.

NBFT_SECURITY_AUTH_POLICY_LIST_ADMIN

Authentication Protocols Offset field and the Authentication Protocols Length field indicate a list of authentication protocols that were administratively set and used by the driver.

NBFT_SECURITY_SEC_CHAN_NEG_MASK

Mask to get the Secure Channel Negotiation Required flag: This field indicates whether secure channel negotiation (e.g. TLS) is required.

NBFT_SECURITY_SEC_CHAN_NEG_NOT_SUPPORTED

Secure channel negotiation is not supported by the NVM subsystem.

NBFT_SECURITY_SEC_CHAN_NEG_NOT_REQUIRED

Secure channel negotiation is supported by the NVM subsystem and is not required.

NBFT_SECURITY_SEC_CHAN_NEG_REQUIRED

Secure channel negotiation is supported by the NVM subsystem and is required.

NBFT_SECURITY_SEC_POLICY_LIST_MASK

Mask to get the Security Policy List flag: This field indicates whether secure channel protocols were indicated by policy from driver defaults or administrative configuration.

NBFT_SECURITY_SEC_POLICY_LIST_NOT_SUPPORTED

The Offset field and Length field in the Secure Channel Algorithm Heap Object Reference field are reserved.

NBFT_SECURITY_SEC_POLICY_LIST_DRIVER

The Heap Object specified by the Secure Channel Algorithm Heap Object Reference field indicates a list of authentication protocols used by the driver.

NBFT_SECURITY_SEC_POLICY_LIST_ADMIN

The Heap Object specified by the Secure Channel Algorithm Heap Object Reference field indicates a list of authentication protocols that were administratively set and used by the driver.

NBFT_SECURITY_CIPHER_RESTRICTED

Cipher Suites Restricted by Policy: If set to 1h, then the Cipher Suite Offset field and the Ciper Suite Length field indicate a list of supported cipher suites by the driver. If cleared to 0h, then the Cipher Suite Offset field and the Cipher Suite Length field are reserved.

NBFT_SECURITY_AUTH_DH_GROUPS_RESTRICTED

Authentication DH Groups Restricted by Policy List: If set to 1h, then connections shall use one of the authentication DH groups in the Authentication DH Groups List is required. If cleared to 0h, then no Authentication DH Groups List is indicated and use of an authentication DH Group is not required.

NBFT_SECURITY_SEC_HASH_FUNC_POLICY_LIST

Secure Hash Functions Policy List: If set to 1h, then connections shall use one of the secure hash functions in the Secure Hash Functions Policy List is required. If cleared to 0h, then no Secure Hash Functions Policy List is indicated and use of a secure hash function is not required.